learn. Everything you need to know

Everything you need to know about our range of Cerasonar speakers

In these short explainer videos, Simon Harvey discusses three Theben solutions - how to avoid LED inrush currents, thePixa 360 and an overview of the Theben MIX2 series.

By using the correct hole saw, the Kaiser back box will be countersunk into the wall ensuring the KNX or Crestron keypad will sit flush to the wall hiding the back box completely.

There is a KNX cable for every application, find out which one you need in this overview.

When an actuator dimming channel is off there is still residual voltage at the output

Battery 6V ensure charged fully before installation

Step by step help guide to add ETS apps and licenses to ETS

An example of documents that will help organise a project.

Information about the THINKNX product ranges functionalities and capabilities

"We had high expectations for this course and Ivory Egg NZ delivered on them all." Grant Kirton, Director, Sosimo.

There are two methods of connecting KNX and Control 4 over an IP network; however, for the past few years the recommended way has been using an IP multicast connection through a KNX IP Router.

How to configure the Gira IP router and some tips to get the most from it.

An online course of videos that you sign up for and complete in 3 parts

Control of the ‘critical systems’ in a building such as lighting, climate, shading, environmental and energy management with AV from manufacturers such as Crestron, Control4, RTI, Sonos, Vantage and others.