SOMFY 1860286

Animeo KNX/RS485 Motor Controller WM

Product code: 1860286

The KNX RS485 Motor Controller enables the controlling of up to 18 motors. The motors can be controlled either individually or by groups.

Description

Flexible installation:DIN Rail, suspended ceiling/raised floor, under-window or wall-mounted wiring channels.
> Quick installation and connection of the motor controller through:
• Plug and play relief
• Cable tension relief points to tighten cables to the
housing of the product
• Daisy chaining of up to 18 x RS485 motors.
> With the Somfy SDN configuration software the motor
settings can be done before configuring via ETS software.
> Perfect alignment of the blind thanks to the increment
encoder technology of the RS485 motors.
> The exact position of the blind during move and when reaching the upper and lower end limits can be monitored.
> Using a one Byte telegram over the KNX, the blind can be moved to numerous intermediate positions.

Technical Details

Specification

Supply voltage from KNX bus: KNX voltage 21...32 V DC, SELV
Rated current consumption KNX: As per KNX guidelines, <=12.4mA
Supply voltage of local push buttons: SELV, 16 V DC
Terminals: RJ45
Operating temperature: -5c to 50c
Relative humidity: Max. 85%
Material of housing: PC-ABS
Housing dimensions: 90 x 180 x 45 mm
Degree of protection: IP 20
Protection class: III
Pollution degree: 2