Fabro KNX Touch Panel
Each area can be used as a button or display. There are over 100 symbols to choose from, next to which a value or colour is dis- played. Objects from 1 bit (switching) to 14 bytes (texts) can be transmitted. On 5 pages, the user thus has up to 40 input and output options.
In the KNX application, 8 calculators are available for data conversion and 8 AND and OR logic gates each. Up to 8 events are de- fined in the alarm module. In the event of an alarm, a text appears in the display, the display light flashes or a beep sounds.
Description
GOOD DESIGN FOR EASY OPERATION
Even in areas with a high degree of soiling or strict hygiene requirements, the design of the unit and surface counts. An intuitive user interface enables quick access to technology. Good design conveys values such as reliability, trust and sa- fety.
Fabro KNX facilitates the handling of building technology in production halls, workshops, greenhouses, food processing plants...
PRACTICAL MATERIALS AND INSTALLATION OPTIONS
The housing of the Fabro KNX touch panel was milled from an aluminium block and is anodised. The front with display and touch surface consists of a continuous glass pane.
Fabro KNX is surface-mounted. The housing allows the cab- les to be surface-mounted or flush-mounted.
- 7 inch display with 800 × 480 pixels
- 5 pages with 8 areas each
- Labelling text can change depending on the status
- Display of values
- RGB Color display
- Internal icon library with over 100 icons
- 336 KNX communication objects
- Dimensions approx 191 mm × 121 mm × 23 mm
- Auxiliary voltage 24 V DC
Technical Details
Specification
Housing: Housing anodised aluminium, realglass
Assembly: Wall mounting on surface
Colour: RAL 9005 jet black
Size: approx.191 mm × 121 mm × 23 mm
Weight: with cable approx 950 g
Display resolution: 800 × 480 px
Ambient and temperature: -20…+55 °C
Ambient humidity (RH) (non-condensing): 5...80 %
Storage temperature: -30...+80 °C
Degree of protection: IP 66
Overvoltage category: III
Degree of contamination: 2
Length connection cable: 3 m
Conductor diameter connection terminals: 0,2…4 mm² / 24…12 AWG
Solid/multi-stranded conductor Fine stranded conductor: 0,14…4 mm² / 24…12 AWG
Stripping length: 11 mm
KNX Bus:
Medium: TP1-256
Configuration mode: S-Mode
Group addresses max: 1024
Assignments max: 1024
Communication objects: 336
Nominal voltage: 30 V SELV
Power consumption max: 10 mA
Wire red: KNX +
Wire black: KNX -
Duration after bus voltage restoration until data is received approx: 4s
Auxiliary voltage:
Specification: DIN EN IEC 61558-1 (VDE 0570-1):2019-12
Nominal voltage: 24 V ±20% SELV
Power consumption max: 140 mA
Wire yellow: +
Wire white: -
Properties
Properties
| Technology | KNX |
| IP rating | IP66 |
