AA/A2.1.2 Analouge Actuator, 2fold, SM
Description
The Analogue Actuator converts KNX telegrams to voltage (0…10V) signals.
These analogue output signals are used to influence regulatory processes. For example, devices for HVAC applications can be adjusted in their operation depending on the information, which are transmitted via the bus system. This Analogue Actuator is a 2-fold device with a housing for surface mounting. The ABB i-bus Tool is supported for advanced diagnosis and improved commissioning.
Technical Details
Specification
Voltage signals:
- 0…1 V DC
- 0…5 V DC
- 0…10 V DC
- 1…10 V DC
- Output signal load Voltage signal: ≥ 5 kohms
- Output current Voltage signal Max. 2 mA per channel
- For 1…10 V output and ballasts Max. 4 mA per Channel
Operating and display elements: Programming button/LED (red) For assignment of the physical address
Analog outputs: A...B Pluggable screw terminals, green 0.08…1.5 mm2 rigid/flexible
Cable entry: 4x, individual stripping length 7 mm
Screw thread: M2
Tightening torque: Max. 0.25 Nm
Degree of protection: IP 54 To DIN EN 60 529
Protection class: II To DIN EN 61 140
Isolation category: Overvoltage category III to DIN EN 60 664-1
Pollution degree: II to DIN EN 60 664-1
KNX safety voltage: SELV 24VDC
Properties
Properties
| Technology | KNX |
