ARCUS
KNX-IMPZ-WZK-M-Warm-130
KNX In Home Water Meters NZR Modularis WZK-M Warm (2,5 m3/h 130mm)
Product code:
60201-75124525
The in home water meter is a package of the calibrated water meter from NZR and the impuls counting unit SK01- IMPZ1 from Arcus-EDS GmbH. The meter is approved by the PTB.
Description
- The internal lithium back up battery enables the functionality without KNX bus connection for over 5 years
- KNX sensors are set up using the ETS ( KNX Tool Software ) with the associated application program.
- The device is delivered unprogrammed.
- All functions are parameterized and programmed by ETS.
Functions
- Serial number
- Accumulated volume in l or m3
- Current flow rate in l or m3/unit of time
- Current time
- Current date
- Last reference date
- Last reference value
- Next reference date
- Consumption value
- Consumption Reset
- Consumption last reset date
- Consumption last reset time
Technical Details
Specification
- Operating Voltage:: EIB/KNX bus voltage 21 .. 32 VDC
- Power Consumption:: ca. 240 mW ( at 24VDC )
- Auxiliary Supply:: not required
- Bus Coupler:: integrated
- Ambient Temperature Electronic Measuring Equipment Casing:
- Operation: -20 .. +55 C
- Storage: -20 .. +85 C
- Start-up with ETS: ARC_IMPZ.VD2
- Circuit Points::: EIB-2-pole clamps ( red / black )
- Protection Class:: IP65
- Assembly Type: Assembly with 2 screws finery
- Casing Type: Plastic housing grey
- Casing Dimensions: 115x65x50mm (WxHxD)I
Impulse Module
- Bus Voltage: KNX Bus 21...30VDC
- Bus Current Consumption: 10mA
Water Meter - Cold
- Nominal Flow Rate: 1.5 m3/h
- Nominal Diameter: 15mm
- Maximum Flow Rate: 3m3/h
- Installation Length: 80mm
Other Meter Sizes and Hot Water Models available on request
Properties
Properties
| Technology | KNX |
