KNX Sensor Temperature Humidity Control Room Pendulum + ext. PT1000 Connector
Description
- Air temperature ( room pendulum sensor ) also weighted with external temperature
- Relative humidity ( room pendulum sensor )
- Calculated values absolute humidity, dew point temperature and energy
content ( enthalpy ) - External PT1000 connector ( PT1000 not included )
- Control functions for heating and cooling applications ( can be combined )
- Setpoint temperatures for Comfort, Standby, Economy and Protection,
selectable via KNX HVAC objects - Setpoint change via objects
- Storage of minimum- and maximum-temperature
- Heat- and frost-alarm
- Limits for temperature and humidity
- Fan control by humidity limits and external inputs
- Detecting of dew point temperature and alarm / regulation at risk of
condensation - Adaptation for setpoint and maximum temperatures
- Controller output 0...100% or programmable PWM for thermal actuators
- Valve rinse function
- Second temperature controller as auxiliary controller
Four logic blocks for the logical link between internal and external signals. - 10 associated logic inputs / outputs
- Heat- and cooling-request as additionally available signals
- Functions "AND, OR, NOT, XOR" for binary logic
- Functions "+ - *" for 8-bit values
- Function "=" for conditional forwarding of events
Technical Details
Specification
Measurement: Temperature Relative Humidity
Calculated Values: Absolute Humidity Dewpoint Temperature Enthalpie
Control: Integrated
Temperature Range: -25 .. +80C
Resolution: 0.02C
Accuracy: ± 0,4C (5..60C), else ± 0,8C
rel. Humidity Range 0 .. 100% r.H
Resolution: 0.02% r.H
Accuracy: ± 3% r.H (20..80%) @ +25C, else ± 5% r.H
PT1000 not included
Temperature Range: -50 .. +400C ( depending on the sensor used )
Resolution: 0.02C
Accuracy: depending on the sensor used
Operating Voltage: KNX Bus Voltage 21 .. 32VDC
Power Consumption: approx. 240mW ( at 24VDC )
Environment Temperature KNX-Module: Operating: -25 .. +80C Storage: -25 .. +80C
Environment Humidity KNX-Module: 0 .. 100% r.H Non Condensing
Bus Coupler: Integrated
Auxiliary Supply: Not Required
Startup with the ETS Version 4 or higher: HLK305
Circuit Points:: KNX 2-Pole Clamps ( red / black )
Protection Class: IP54/65
Housing KNX-Module: Plastic
Dimensions Housing KNX-Module: ( 72 x 64 x 40 ) mm
Properties
Properties
| Technology | KNX |
| EAN | 642000000000 |
