free@home Blind Actuator, 4-fold, 230 V, MDRC
ABB BA-M-0.4.1

free@home Blind Actuator, 4-fold, 230 V, MDRC

Product code: 2CDG510011R0011
For controlling 4 independent blind or roller shutter drives. The outputs are inversely blocked. The bus can be connected via enclosed terminal block.
Price (Excluding GST)
$P.O.A

Description

This device is a blind actuator for installing on a mounting rail. It has four channels and serves as actuator for the activation of blinds, roller blinds or awnings.

  • Four channels for the activation of four blinds, roller blinds or awnings.
  • Drives of 24 V AC to 230 V AC are supported.
  • Two channels can always be protected with a common circuit-breaker.

Technical Details

Specification

Power supply: 24 V DC (via the bus)

Bus subscribers: 1 (12 mA)

Connection (free@home): Bus connection terminal: 0.4 - 0.8 mm

Line type: J-Y(St)Y, 2 x 2 x 0.8 mm

Nominal voltage: 24 to 230 V AC 50/60 Hz

Max. switching current: 6 A (AC1/AC3) at 230 V AC

Outputs: 4 independent outputs with 2 switchover actuators each (mechanically locked Up/Down against each)

Connecting terminals:

  • 2 screw-type terminals for power supply system, different phases are possible.
  • 2 screw-type terminals per output for Up and Down
  • Combi-head screw-type terminal (PZ 1). Connection cross section:
  • 0.2 - 4.0 mm2 fine-wire, 2 x 0.2...2.5 mm2
  • 0.2 - 6.0 mm2 single-wire, 2 x 0.2...4.0 mm2
  • Tightening torque: 0.6 Nm

Ambient temperature:

  • Operation: -5¡C to +45¡C
  • Storage: -25¡C to +55¡C
  • Transport: -25¡C to +70¡C

Environmental conditions: Maximum humidity 93%, no dew permissible

Protection type: IP20. Acc. to DIN EN 60 529

Protection class: II. Acc. to DIN EN 61 140

Insulation category:

  • Over voltage category: III acc. to DIN EN 60 664-1
  • Degree of contamination: 2 acc. to DIN EN 60 664-1

Mounting: On 35 mm mounting rail. Acc. to DIN EN 60 715

Built-in position: Any

Design:

  • Rail mounting device (MDRC): Modular installation device, Pro M
  • Installation width: 4 modules ˆ 18 mm
  • Installation depth: 64.5 mm
  • Housing, colour: Plastic, basalt grey (RAL 7012)

Dimensions: 72 x 9C0 x 64.5 mm (W x H x D)

Weight: 0.22 kg

CE marking: According to EMC and low-voltage guidelines

Properties

Properties

Technology Other Control
Mounting DIN Rail
Outputs 4
IP rating IP20
Mounting Width 4MW

Documents & Downloads

Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy