cs-2000dsp4 Amplifier

Description

The amplifier is controlled via USB or LAN (several units can be controlled simultaneously). In both cases, no additional device drivers are necessary. Basic settings can be made via the LCD display, there is also password protection to prevent the amplifier from unauthorised access. Analogue input sources (balanced and unbalanced) can be connected via XLR (adapter cable RCA to XLR available on request) or Phoenix terminal. The latter ensure that the signal can also be routed to another amplifier. It was important to us that the cs-2000dsp4 is fully Dante-com- patible, so that digital sources can be connected easily.

For a proper installation of the cerasonar speakers, a prior sound check is indispensable. In order to check for possible vibration noises (e.g. loose substructure screw connection), the software con- tains a tone generator (sine tone) which can be used to smoothly adjust the desired frequency. In addition, a "pink noise“ and "white noise“ can be output. This means that the frequency curve can be checked without connecting an additional measuring system - only a smartphone is necessary.*
-> Ideal to determine the correct phase or delay, or to make DSP corrections!

The power of the cs-2000dsp4 is 4x 500 watts into 4 ohms or 2x 1000 watts into 8 ohms or 70/100V (bridged). Due to the high power output, the amplifier is ideal for driving larger 70/100V systems or for operation with our powerful sub- woofers or speakers.

There are two LAN ports; for larger projects, the amplifiers can be connected to each other so that only one LAN port is required for connection.

Basic functions of the amplifier can be controlled via the RS232 or RS485. The supplied adapter also allows ON/OFF control of the amplifier via the GPIO port.

*The measurement result depends on the quality of the built-in microphone A calibrated, external one is recommanded.

Technical Details

Documents & Downloads