LUNATONE
86458668-AN
Converter DALI to 1-10V 1mA, off with Relay 8A, electrical isolated
Product code:
86458668-AN
Converter module for the integration of 0-10V or 1-10V controlled ballasts in DALI lighting systems (DT5)
Description
This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on and off. DALI device type 5 (IEC62386-206) compatible:
- linear or logarithmic dimming curve
- 0-10V or 1-10V output range
Technical Details
Specification
- For the integration of electronic ballasts with PWM input or 0-10V input
- An SPST-relay offers the possibility to power on/off the mains supply of the electronic ballast
- Types with PWM output offer the high noise immunity of digital signal transmission, suitable for electronic ballasts with PWM control input (e.g.: Meanwell HLG, HLN, NPF or LPF series)
- The type with analog output offers an automatic calibration algorithm for the output signal.
- Transformation of DALI 8-bit direct arc power level into PWM output signal (0-100%) or analog voltage (1-10V)
- DALI DT5 compatible: linear and logarithmic control characteristic
- DALI DT5: change of output range for PWM-type (0-100% / 10-100% PWM)
- Suitable for multiple ballast (max. Sinking current 2ma)
- RM16 type for high inrush currents up to 160A
- The control of the SPST-relay is directly linked to the 8-bit direct arc power level. If the value is 0 the relay is OFF. At any other value the relay is ON.
- The module is supplied directly by the DALI signal line. An additional supply is not needed.
- The interface can be addressed and assigned to groups and scenes.
- Galvanic isolation between DALI input and PWM or 1-10V output
Properties
Properties
| Technology | DALI |
