Cala KNX T 101 Room Temperature Controller black RAL 9005
Description
The Cala KNX T 101 has got an integrated PI controller for a heating and a cooling system (one or two step). The room temperature is adjusted by means of the „+" and „-" touch buttons.
The device is supplemented with a frame of the switch series used in the building, and thus fits seamlessly into the interior fittings.
- Heating controller/thermostat
- Glass surface with temperature display and +/- touch keys
- Measurement of temperature. Mixed value from own measured value and external values (proportions can be set in percentage), output of minimum ,and maximum values
- Display of the actual value or the target value/basic setpoint shift
- 2 touch buttons (+/-) for adjustment of the room temperature
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Configuration is made using the KNX software ETS 5.
Technical Details
Specification
Casing: Genuine glass, plastic
Installation: on device socket according to DIN EN IEC 60670-1 and DIN 49073
Degree of protection: IP 20
Dimensions: Housing approx. 55 x 55 (W x H, mm), Installation depth approx. 10 mm, Base plate approx. 71 x 71 (W x H, mm)
Total weight: approx. 50 g
Ambient temperature: Operating -5…+45°C, storage -30…+85°C
Ambient humidity: max. 5... 95% RH, avoid condensation
Operating voltage: KNX bus voltage
Bus current: max. 15 mA
Data output: KNX +/- Bus plug-in terminal
Communication objects: 41
Temperature measurement range: -5…+60°C
Properties
Properties
| Technology | KNX |
