KNX eTR 101 - KNX room temperature controller, white
The KNX eTR 101 has got an integrated PI controller for a heating and a cooling system (one or two step). The room temperature is adjusted by means of the + and - touch buttons.
Description
- Measurement of temperature. Mixed value from own measured value and external values (proportions can be set in percentage), output of minimum and maximum values
- Display of the actual value or the target value/basic setpoint shift
- 2 touch buttons (+/-) for adjustment of the room temperature
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
Technical Details
Specification
Housing: plastic material, glass
Colours: similar to RAL 9003 signal white
Mounting: on-wall (directly or with a socket Ø 60 mm, resp. cavity wall socket for hole Ø 68 mm)
Protection category: IP 20
Dimensions: housing approx. 81,5 x 81,5 (W x H, mm), mounting depth approx. 12 mm
Total weight: approx. 65 g
Ambient temperature: Operation and storage -25…+80°C
Ambient air humidity: max. 95% RH, avoid bedewing
Operating voltage: KNX bus voltage
Bus current: 10 mA at 50% LED brightness, 18 mA at 100% LED brightness
Data output: KNX +/- bus terminals
BCU type: Own micro controller
PEI type: 0
Group addresses: max. 254
Allocations: max. 254
Communication objects: 41
Temperature measurement range: -25…+80°C
Properties
Properties
| Technology | KNX |
