Surface Mounted Door Station - 1 Call Button, Video TX44 Anthracite
GIRA 126967

Surface Mounted Door Station - 1 Call Button, Video TX44 Anthracite

Product code: 126967
Door station with camera, door speaker and call button, 1-gang, as completely npre-assembled unit for surface-mounted installation.
Price (Excluding GST)
$P.O.A

Description

The surface-mounted door station has the following product features:

  • Completely pre-assembled surface-mounted door station with
  • TX 44 design enables fast, clean installation.
  • Signal transmission and supply of the subscribers via reverse polarity protected, short-circuit-proof 2-wire bus.
  • Torsionally rigid surface-mounted housing through aluminium profile.
  • Cover frames of shutter-proof thermoplast with a high resistance to ultraviolet light as well as a scratch-resistant care-free surface.
  • Theft protection by means of Torx screws.
  • Start-up is a one-man job, thanks to the simple start-up procedure.
  • Weather-proof speaker.
  • High-quality electric microphone.
  • Hands-free feature (voice-controlled talk-back with echo and background noise suppression).
  • Audible acknowledgement signal with pressing of call buttons.
  • Adjustable speech volume.
  • White call button illumination in LED technology.
  • Splash-water sealed call-button cover plate made of impact resistant plastic.
  • Name plate of call button can be exchanged without tools and frame removal.
  • Professional labelling via the Gira labelling service (request card included here) or with the Gira labelling software.

The colour camera has the following properties:

  • Automatic switching from day to night mode: The camera switches from daytime operation (colour presentation) to night mode (black and white presentation) and back again at a defined ambient brightness. Due to the high degree of light sensitivity in night mode, good presentation results are achieved even with poor lighting conditions.
  • LEDs ensure steady illumination of the field of view illumination in night mode.
  • Camera can be swivelled 20º horizontaly and vertically by hand. In conjunction with the wide-angle lens, a very wide field of view of the door entry area results.
  • Automatic background lighting compensation.
  • Automatic white balance.
  • Automatic gain control.
  • Integrated camera heating with temperature detection.
  • Splashed water-protected cover plate.
  • Camera cover plate made of impact-resistant plastic. Easy to replace if damaged, e.g. due to vandalism.

Technical Details

Specification

  • Power supply: 26 V DC ± 2 V (bus voltage)
  • Connections: 2 terminal screws for 2-wire bus
  • 2 terminal screws for additional supply
  • Dimensions: W x H x D 110 x 253 x 19 mm
  • (without camera)
  • W x H x D 110 x 253 x 40 mm (with camera)
  • Name plate dimensions: W x H 62 x 62 mm
  • Image capture element: CCD sensor 1/3"
  • Wide-angle objective: 150º Aperture angle
  • Visible detection range: Angular coverage of the camera 100º
  • Detectable area (with 20º swivelling): 140º
  • Colour system: PAL
  • Pixels: 500 (H) x 582 (V)
  • Horizontal resolution: 380 TV lines
  • Switching threshold colour to B/W operation: 1 lux
  • Light sensitivityin B/W operation: 0.1 lux
  • Electronic shutter close time: up to 1/100000 s
  • IR filter: integrated
  • Recommended camera installation height: 1.50 m
  • Temperature range: -20 ºC to +50 ºC

Properties

Properties

Technology Door Comms
Design range GIRA TX44
Insert finish TX44 Anthracite
Mounting Surface
Input voltage Via Door Comms Bus
IP rating IP44

Documents & Downloads

Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy