System 55 Keyless In Keypad, pure white

Description

The keypad offers the following product features:

• Installation in the 58 mm flush-mounted box.
• Capacitive button field. Coming close to or touching the numbers is sufficient for code entry. Thanks to the wear-free capacitive technology, no recognisable wearing of frequently used number combination.
• As standalone device or in combination with the Gira door communication system, enables convenient door opening for authorised persons and a door call system for buildings with several housing units.
• In standalone operation, the zero-voltage relay contacts contained in the flush-mounted insert are used for the switching processes, e.g. for door openers with their own power supply (e.g. common bell transformer).
• Special button "C": Deleting an incorrect entry.
• Special button "Key": After entry of the correct code, direct door opening is carried out when the button is pressed.
• Special button "Bell": Specific selection of home stations in large facilities.
• Special button "F": Switching functions are possible with this button in conjunction with switching actuators 1211 00 and 1289 00 of the Gira door communication system.
• Integration in the Gira door communication system without additional system components.
• Commissioning possible with direct configuration on the device, the keypad is put into operation without a PC or programming software.
• Homogeneous blue LED illumination of the numbers and special characters at night.
• Design diversity via integration in the Gira design platforms TX 44 and System 55. Integration in F100 and Stainless Steel Series 20 and Series 21 possible with adapter frames.
• Master PIN number provided on included sealed security card if Administrator PIN number is lost.
• The keypad can manage up to 255 codes.
• Up to 32-digit codes possible.
• Audible feedback when buttons are touched.
• Three-colour LED status display for optical signalling during programming and operation.
• Warning tone in case of unauthorised removal of the keypad top unit for tamper detection. A tampering circuit can also be realised in connection with the Gira door communication system using a switching actuator.
• The two integrated two-way switch relays can be assigned two different codes, e.g. Code 1: door opening, Code 2: switching outside light. Inputs and outputs
• Switching contact: 2 relays with zero-voltage two-way switch contacts
• Load capacity:24 V/1.6 A AC/DC
• Connector strip for system bus of Gira door communication system
• 2 connections for additional supply

Technical Details

Documents & Downloads