INTESIS
INBACDAL0640200
DALI-2 to BACnet IP & MS/TP Server Gateway - 64 devices
Product code:
INBACDAL0640200
Integrate any DALI/DALI-2 driver and DALI-2 light sensor, or occupancy sensorÊwith a BACnet BMS or any BACnet IP or BACnet MS/TP controller. The aim of this integration is to make DALI devices and its data and resources accessible from a BACnet based control system or device, as if it was a part of the own BACnet system and vice-versa.
Description
FEATURES:
- UL Certified
- BTL Certified
- DALI-2 certified
- Support for BACnet IP Client and MSTP Master
- BACnet Advanced features available (Trend logs, Calendars, etc.)
- Support for DALI & DALI-2 drivers and DALI-2 sensors
- Integrated DALI power supply
- Up to 2 DALI channels
- Up to 64 drivers/ballasts + 16 DALI-2 sensors per channel (Guaranteed DALI supply: 235mA)
- Easy integration & DALI commissioning with Intesis MAPS
This bidirectional gateway provides a straightforward and fast integration thanks to its unique onboard features.
The BTL mark ensures 100% compatibility and, at the same time, guarantees a seamless integration with any BACnet device.
The configuration is carried out using the Intesis MAPS software. This one allows you to define your own settings for the device. Also, it will be able to download all the available project templates or to import any created/exported project template on your computer.
Technical Details
Specification
Enclosure
- Plastic, type PC (UL 94 V-0)
- Net dimensions (dxwxh): 90x88x56 mm
- Recommended space for installation (dxwxh): 130x100x100mm
- Colour: Light Grey. RAL 7035
Mounting
- Wall.
- DIN rail EN60715 TH35.
Terminal Wiring (for power supply and low-voltage signals)
- Per terminal: solid wires or stranded wires (twisted or with ferrule)
- 1 core: 0.5mm2... 2.5mm2
- 2 cores: 0.5mm2... 1.5mm2
- 3 cores: not permitted
- If cables are more than 3.05 meters long, Class 2 cable is required.
Power
- 1 x Plug-in screw terminal block (3 poles)
- Positive, Negative, Earth
- 24VDC +/-10% / 6.5W
Ethernet
- 1 x Ethernet 10/100 Mbps RJ45
- 2 x Ethernet LED: port link and activity
Port A
- 1 x DALI port (Plug-in screw terminal block orange 2 poles). 1500VDC isolation from other ports DALI guaranteed power: 235mA. Voltage rating: 16VDC
- 1 x Plug-in screw terminal block green (2 poles). Reserved for future use
Switch A (SWA)
- 1 x DIP-Switch for serial EIA485 configuration: Reserved for future use
PORT B
- 1 x Serial EIA232 (SUB-D9 male connector). Reserved for future use
- 1 x Serial EIA485 Plug-in screw terminal block (3 poles) A, B, SG (Reference ground or shield). 1500VDC isolation from other ports. (except PORT B: EIA232)
Switch B (SWB)
- 1 x DIP-Switch for serial EIA485 configuration:
- Position 1: ON: 120 ½ termination active. Off: 120 ½ termination inactive (default)
- Position 2-3: ON: Polarisation active (default) Off: Polarisation inactive
Battery
- Size: Coin 20mm x 3.2mm
- Capacity: 3V / 225mAh
- Type: Manganese Dioxide Lithium
Console Port
- Mini Type-B USB 2.0 compliant
- 1500VDC isolation
USB port
- Type-A USB 2.0 compliant
- Only for USB flash storage device (USB pen drive)
- Power consumption limited to 150mA (HDD connection not allowed)
Push Button
- Button A: DALI test
- Button B: Broadcast of I-Am message
Operation Temperature
- 0¡C to +60¡C
Operational Humidity
- 5 to 95%, no condensation
Protection
- IP20 (IEC60529)
LED Indicators
- 10 x Onboard LED indicators:
- 2 x Run (Power)/Error
- 2 x Ethernet Link/Speed
- 2 x Port A TX/RX
- 2 x Port B TX/RX
- 1 x Button A indicator
- 1 x Button B indicator
Properties
Properties
| Technology | KNX |
| Mounting | DIN Rail |
| IP rating | IP20 |
| Mounting Width | 6MW |
| Operating Voltage | 24VDC |
