Fujitsu VRF systems to Modbus TCP/RTU
  • Intinascknx3k00000
  • Intinascknx3k00000
  • Intinascknx3k00000
INTESIS INMBSFGL016O000

Fujitsu VRF systems to Modbus TCP/RTU

Product code: INMBSFGL016O000
The FujitsuÊinterface has been specially designed to allow bidirectional control and monitoring of Fujitsu VRFÊsystems from a BMS, SCADA, PLC or any other device working as a Modbus master.
Price (Excluding GST)
$P.O.A

Description

FEATURES

  • UL Certified
  • Direct access to outdoor unitÕs communication bus.
  • Scan: Automatic identification of the units presents in the VRF system.
  • Outdoor unitÕs signals available for the integration.
  • The interface is a Modbus slave able to manage Modbus TCP and Modbus RTU simultaneously.
  • Up to 6 Modbus TCP clients (incoming sockets) are supported.
  • Datalogging through external USB port.
  • Configuration through IP or USB (Console) port.
  • Front cover LED indicators to provide easy to check communication status on both the Ethernet and serial ports.
  • Automatic updates for both Intesis MAPS and interfaceÕs firmware.

DIRECT CONNECTION TO VRF OUTDOOR UNITS

The gateway is directly connected to the outdoor units communication bus and enables the control of all the indoor units connected to the system. This allows not only the control and monitoring of the main AC functions but the access to some internal variables of the outdoor units.

SET UP BY INTESIS MAPS

The configuration is carried out using the Intesis MAPS software. This one allows you to define your own settings for the device and offers extra functions available for all the new generation gateways. Thanks to the scan function, which allows to automatically discover all the units available in the installation, get the interface ready to work in a really short time.

Intesis MAPS makes it easy to identify any malfunction in the installations thanks to its robust diagnostic feature.

Technical Details

Specification

Enclosure

  • Plastic, type PC (UL 94 V-0)
  • Net dimensions (dxwxh): 90x88x56 mm
  • Recommended space for installation (dxwxh): 130x100x100mm
  • Colour: Light Grey. RAL 7035

Mounting

  • Wall.
  • DIN rail EN60715 TH35.

Terminal Wiring (for power supply and low-voltage signals)

  • Per terminal: solid wires or stranded wires (twisted or with ferrule)
  • 1 core: 0.5mm2... 2.5mm2
  • 2 cores: 0.5mm2... 1.5mm2
  • 3 cores: not permitted

Power

  • 1 x Plug-in screw terminal block (3 poles)
  • 9 to 36VDC +/-10%, Max.: 140mA.
  • 24VAC +/-10% 50-60Hz, Max.: 127mA
  • Recommended: 24VDC

Ethernet

  • 1 x Ethernet 10/100 Mbps RJ45
  • 2 x Ethernet LED: port link and activity

Port A

  • 1 x Fujitsu X1X2 Plug-in screw terminal block orange (2 poles) 1500VDC isolation from other ports
  • 1 x Plug-in screw terminal block green (2 poles). Reserved for future use

Switch A (SWA)

  • 1 x DIP-Switch for PORTA configuration: Reserved for future use (leave OFF, default)

PORT B

  • 1 x Serial EIA232 (SUB-D9 male connector). Pinout from a DTE device. 1500VDC isolation from other ports (except PORT B: EIA485)
  • 1 x Serial EIA485 Plug-in screw terminal block (3 poles) A, B, SGND (Reference ground or shield) 1500VDC isolation from other ports. (except PORT B: EIA232)

Switch B (SWB)

  • 1 x DIP-Switch for serial EIA485 configuration:
  • Position 1: ON: 120 ½ termination active. Off: 120 ½ termination inactive (default)
  • Position 2-3: ON: Polarisation active (default) Off: Polarisation inactive

Battery

  • Size: Coin 20mm x 3.2mm
  • Capacity: 3V / 225mAh
  • Type: Manganese Dioxide Lithium

Console Port

  • Mini Type-B USB 2.0 compliant
  • 1500VDC isolation

USB port

  • Type-A USB 2.0 compliant
  • Only for USB flash storage device (USB pen drive)
  • Power consumption limited to 150mA (HDD connection not allowed)

Push Button

  • Button A: Not used
  • Button B: Not used

Operation Temperature

  • 0¡C to +60¡C

Operational Humidity

  • 5 to 95%, no condensation

Protection

  • IP20 (IEC60529)

LED Indicators

  • 10 x Onboard LED indicators:
    • 2 x Run (Power)/Error
    • 2 x Ethernet Link/Speed
    • 2 x Port A TX/RX
    • 2 x Port B TX/RX
    • 1 x Button A indicator
    • 1 x Button B indicator

Properties

Properties

Technology Open Protocols
Mounting DIN Rail
IP rating IP20
Mounting Width 6MW
Operating Voltage 24VDC
Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy