Fujitsu VRF systems to KNX Application - 4 indoor units

Description

KNX standard datapoints (DPTs) support

KNX standard datapoints (DPTs) are supported, guaranteeing a simple KNX device/system integration.

Direct access to the outdoor unit

Connection is simple, as the interface connects directly to the outdoor unit’s communication bus.

Automatic identification

A scan function is available for automatic identification of the units present in the VRF system.

Outdoor unit signals

Signals assigned to the outdoor unit are available to be used in the integration.

Individual indoor unit energy consumption signals

Energy consumption signals from each indoor unit are available, so they can be checked individually.

Datapoint support

A wide range of monitoring and control datapoints is available.

Commissioning-friendly approach with Intesis MAPS

Templates can be imported and reused as often as needed, significantly reducing commissioning time.

Configuration tool and interface automatic updates

Both the Intesis MAPS configuration tool and the interface's firmware can receive automatic updates.

This bidirectional gateway connects to the Fujitsu outdoor unit’s X1/X2 bus to monitor and control up to 4 indoor units individually.

Thanks to its “late configuration” feature, this bidirectional gateway can be configured with Intesis MAPS to select among one of these four (4) protocols to integrate the Panasonic AC units into:

• BACnet (IP or MS/TP)
• Modbus (TCP & RTU)
• KNX IP
• WMP (the Intesis ASCII based protocol for IP-base Home Automation systems)

 
Scan the network to detect the Fujitsu outdoor and indoor units connected to the bus (check the gateway’s user manual for additional information).
Configuration tool: Intesis MAPS.
Certifications: UL, BTL, UKPSTI, UKCA, EC Declaration of Conformity 

Technical Details

Documents & Downloads