KNX TH65-AP - KNX Thermo-Hygrometer
The KNX TH65-AP provides seven switching outputs with adjustable threshold values as well as additional AND and OR logic gates. The sensor has got a PI controller for heating and cooling (depending on temperature) and for ventilation (depending on air humidity) and it can emit a warning to the bus as soon as the area of optimum comfort (according to DIN 1946) is left.
Description
- Measurement of temperature and air humidity (relative and absolute), calculation of dew point
- Mixed values from own measured values and external values (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature
- PI controller for ventilation depending on humidity: Dehumidify/humidify (one step) or dehumidify (one or two step)
- 7 switching outputs with adjustable threshold values (Threshold values can be set by parameter or via communication objects
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 8 logic inputs in the form of communication objects may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- Configuration is made using the KNX software ETS
Technical Details
Specification
Housing: Plastic material, sensor sleeve metal
Colour: Grey
Mounting: On-wall
Protection category: Casing: IP 65. Outside sensor: IP 43
Dimensions: approx. 65 x 91 x 38 (W x H x D, mm)
Weight: approx. 80 g
Ambient temperature: Operation -25…+80°C, Storage -55…+105°C, avoid bedewing
Operating voltage: KNX bus voltage
Bus current: max. 5.5 mA, max. 9 mA when programming LED is active
Data output: KNX +/- bus terminal plug
Communication objects: 110
Measurement range temperature: -25…+80°C
Measurement range humidity: 0% RH … 100% RH
Properties
Properties
| Technology | KNX |
