porta 4.0 IP bidirectional interface, Konnex (KNX) protocol

Description

porta 4.0, a KNX compatible device, can take control of all Ksenia lares 4.0 control panels family, through standard KNX devices.

In fact, when the gateway porta 4.0 receives a Konnex datagram, it is possible to perform the following operations on lares 4.0 control panel:

• Management of monostable / bistable outputs
• Exclusion / inclusion zones
• Scenarios implementation

Moreover, when one of the following events occurs on lares 4.0 control panel:

• Status change of a zone
• Status change of a partition
• A fault

It is possible to send a datagram to a Konnex device, either of switching type or with payload up to 2 bytes. The whole configuration is instead carried out through the web interface for configuring the lares 4.0 control panel, therefore it can be performed locally or remotely, by using a PC/MAC or a mobile device. The device is connected to the control panel via Ethernet and can be powered by PoE or by external power supply (12 / 24Vdc).

porta 4.0 is supplied with a plastic box that occupies 4 DIM modules.

Technical Details

Documents & Downloads