Lumento C4. 4-channel constant current PWM dimmer for DC LED loads

ZENNIO ZDI-RGBCC4

Lumento C4. 4-channel constant current PWM dimmer for DC LED loads

Product code: ZDIRGBCC4

LED dimmer with 4 channels (RGBW or single channels) oriented to LED technology with constant current regulation. The dimming channels can be configured as 4 independent channels, 1 RGBW channel or 1 RGB channel + 1 individual channel. It has a manual test button to check the channels functioning. Maximum current selection with parameter and manual selector: 220, 300, 350, 500, 550, 630, 700 or 750, 900 and 1000 mA.

Description

Control of constant current RGBW LED loads or 4 independent channels.
Output currents: 220mA, 300mA, 350mA, 500mA, 550mA, 630mA, 700mA, 750mA, 900mA and 1A.
External power supply required (12-30 VDC).
LED test function.
KNX BCU integrated.
CE directives compliant.

Technical Details

Specification

General System Specifications

KNX Power Supply: 29VDC
KNX Current Consumption: 8mA @ 29VDC
Operating temperature: 0 ¡C to 45 ¡C
Assembly: Independent control assembly device. Connect LUMENTO as near as possible to both, the load to dimmer and the external power supply.
Bus power failure response: Data saving
Response when restarting bus: Data recovery
Operation Indicator: Programming LED: programming mode (red lighting), safe mode (red blinking). Test LED: in test mode, red, test channel 1 (R); green, test channel 2 (G); blue, test channel 3 (B). Reverse polarity of external power supply is indicated by the test LED in orange light. If there is not an external power supply connected it blinks in orange. If the currents selected by parameter and by selector switch don't match it blinks in white. Overheating protection: the test LED lights in red (continuous level 1 of protection, blinking with level 2 of protection).

Outputs

Maximum current per channel: 1A @ 25 ¡C ambient temperature
Number of channels: 4
Output currents 220mA, 300mA, 350mA, 500mA, 550mA, 30mA, 700mA, 750mA, 900mA or 1A
Connection type: Terminal block (screw)
Cable section: 10.5 mm to 20.5 mm
Load type: Load with positive and negative terminals.
Shortcut protection: Yes
Overheating protection: Yes

Inputs