ABB
MD-F-1.0.PB.1
free@home Movement Detector
Product code:
2CKA006220A0229
With select lens for detection with animal access. For automatic switching of ABB-free@home¨ actuators dependent on movement and brightness. Switch-off delay of the actuator can be programmed via the web interface of the System Access Point. The bus can be connected via enclosed terminal block.
Description
- The movement detector sensor (with bus coupler) can be assigned to an available switch actuator.
- The devices respond to moving body heat and switch on the lights.
- They have not been pre-programmed.
- The devices do not serve as a substitute for an alarm system.
- The sensor is integrated in a flush-mounted insert [1].
- The integrated bus coupler makes possible the connection to the free@home bus line.
Technical Details
Specification
Power Supply: 24 V DC (via bus line)
Bus subscribers: 1 (12mA)
Connection: Bus connection terminal: 0.4-0.8 mm
Line type: J-Y(St)Y, 2 x 2x 0.8 mm
Wire stripping: 6-7 mm
Opening angle: 180 ¡
Brightness limit value: 1 Ð 500 lux
Mounting height: 1.1 m to 1.3 m
Protection: IP20
Ambient temperature: -5 ¡C Ð +45 ¡C
Storage T¡: -20 ¡C Ð +70 ¡C
Properties
Properties
| Technology | Other Control |
| IP rating | IP20 |
