free@home Switch Actuator sensor, 2/1 gang, wireless, Future linear
- For switching 127 V~/230 V~ consumers.
- Communication with the free@home system is carried out wireless.
- With integrated switch actuator.
- Switching function is available also without prior programming (pre-configured).
- Configuration can be changed later via the web interface (groups, scenes, etc.).
- The right sensor channel for programming additional functions (groups, scenes, etc.)
- For contacting 2gang rocker 6230-2x-xxx, 6231-2x-xxx, 6232-2x-xxx, 6233-2x-xxx and 6234-2x-xxx.
- 3 wire connection (neutral conductor required).
- With 230 V extension unit input (On/Off).
- With fixing claws.
Description
This device is a sensor/switch actuator unit for decentralised flush-mounted installation. The device serves both as control element as well as actuator for the activation of electric loads.
Sensor and actuator are combined in a flush-mounted insert. The sensor and switching channels have been pre-programmed at the point of delivery (button top/bottom: off/on; left rocker). However, this pre-configuration can be adjusted as required.
After activating the bus voltage and connecting the load, it can be switched directly on the control element. The integrated bus coupler makes possible the connection to the free@home bus line.
- Green LEDs as light for orientation/status indication
- Exchangeable rockers with the corresponding icons.
Technical Details
Specification
Operating voltage: 230 V AC, 50/60 Hz
Connection
- L, N (option), inputs and outputs non- floating
- Screw-type terminal:
- 2 x 2.5 mm2 rigid;
- 2 x 1.5 mm2 flexible
Claw: With protective cover and reset (removable)
Transmission protocol: free@home wireless
Transmission frequency: 2.400 - 2.483 GHz
Maximum transmission power WL (wireless): < 15 dBm
Power consumption: <1W
Maximum load:2 x 5 A/4 Ax
Protection type: IP20
Ambient temperature: -5¡C - +45¡C
Storage temperature: -20¡C - +70¡C
Properties
Properties
| Technology | Other Control |
| IP rating | IP20 |
