King Touch panel server 5.5" with unlimited clients in silver finishes + Temperature and humidity sensors + Doorcom

THINKNX K2_SILVER

King Touch panel server 5.5" with unlimited clients in silver finishes + Temperature and humidity sensors + Doorcom

Product code: K2_SILVER

ThinKnx King is the elegant stand-alone server, very easy to configure, that permits the control of the KNX plant and is the ideal solution for different scenarios such as residential buildings or hotels. The 5.5” high-resolution capacitive touch screen, the embedded temperature and humidity sensors as well as the RGB nightlight enhance its performances. King server supports the integration of Siri, Google Home and Alexa voice control. It also allows to interact with third-party IFTTT, MQTT, API and Ethernet Gateway services.

Description

Direct KNX connection: Linux-based appliance with direct connection to the KNX bus (no need of separate IP-router).

Unlimited Clients: An unlimited number of clients (PCs, smartphones or tablets) can simultaneously connect to the server.

Unlimited KNX data-points: There aren't limitations on the number of KNX entities that can be controlled by our servers.

Electrical Switching: There are different kinds of switches available: on/off normally open, on/off normally close, on on pressure/off on release, on on pressure, value on pressure, etc.

Dimming Regulation: The lights can be easily dimmered through a simple interface of the client app.

RGB led: RGB leds can be controlled through KNX.

Blinds Control: Rollers and blinds contains KNX groups to move, to stop and to obtain a feedback of shades, blinds, etc.

Heating & Cooling: The chronothermostat is used to interact with a KNX thermostat and allows to set weekly timers to control the temperature. The desired temperature can be hourly and daily set.

Generic Timers: Switching can be temporised using two modes: the “Calendar” mode allows to set complex temporisations while the “Switch Schedule” mode allows to set six weekly temporisations.

Weather Forecasts: Weather forecast can be displayed into the client application.

Load Control: The loads control allows to monitor the electric energy consumption following disarm thresholds and rearm intervals.

Scenes management: Scene is a sequence of programmed actions such as the switching on of the lights in a room. This list of action can be predetermined by the user through the scene recording function.

Logics & Math: Logical operations (AND, OR, XOR) and mathematical functions based on values coming from KNX groups can be created using simple and intuitive interfaces.

Analogical Values: Visualize analogical values in the client interface (for example weather data such as wind speed, outdoor temperature, etc.) and to send them to a KNX group (for example to adjust threshold values).

IP Cameras: Visualization of IP cameras with MJPEG or RTSP video flow.

SMS Gateway: Service that allows to send SMS notifications when specific conditions predefined in the ThinKnx Configurator occur (no additional hardware required).

Generic Gateway: It is possible to perform actions depending on a command or a specific value sent by the KNX bus (or other integrated systems), for example it is useful to create temperature alarms.

Push Notifications: Management of technical alarms with push notification messages (iOS), email and automatic page change in the ThinKnx client interface.

Infrared Control: Integration of IR TRANS devices to control TVs, Blurays, Apple TV, etc. directly from ThinKnx client interface (no database required).

Reports until 20MB: It allows to collect data up to 20 MB from KNX plants (both locally and on the cloud), to generate reports and to continuously store KNX telegrams (logger modality).