ZENNIO
ZIO-MB16V4
MAXinBOX 16 V4. KNX multifunction actuator - 16 outputs 16A
Product code:
ZIOMB16V4
MAXinBOX 16 V3 is a multifunction actuator for DIN rails that offers multiple configurations of up to 8 shutter channels, up to 16 independent outputs of 16A (capacitive loads supported) and up to 4 blocks of 2-pipes fan coil controller. It allows manual control of its outputs thanks to the push buttons on the cover. It includes 20 independent logical functions.
Description
- 4 different configurable blocks:
- Shutter channels (up to 8).
- Individual outputs (up to 16).
- 2-pipe fan coil control (up to 4 units).
- Manual output operation with push button and LED status indicator.
- Suitable for capacitive loads, maximum 140 µF.
- Logical functions included.
- Output timing facilities.
- Total data saving on power failure.
- Size 90 x 60 x 140 mm (8 DIN units).
- DIN rail unit assembly (EN 50022), with snap fit clamp.
- No external power supply required other than the bus.
- KNX BCU integrated.
- Possibility to connect different phases in adjoining outputs.
- CE directives compliant
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 11mA @ 29VDC
- Operating temperature: 0 ¡C to 55 ¡C
- Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
- Response to Bus Voltage Failure: Data saving and relay status change according to parameterization.
- Response to bus failure recovery: Data recovering and output status change according to parameterization
- Operation indication: Programming LED indicates programming mode (red) and test mode (green). Output status LED indicators reflect current output state.
Outputs:
- Contact type: Potential free outputs through bistable relays with tungsten pre-contact.
- Disconnection type: Micro-disconnection
- Rated current by output: 16(6)A * 250V AC (4000 VA) 16(6)A * 30V DC (480W)
- Number of outputs per common: 1 shutter channel
- Different phases connection: Possibility to connect different phases in adjoining shutter channel outputs
- Max Current per Block: 40A
- Max Power - Resistive Load: 4000W
- Max Power - Inductive Load: 1500VA
- Connection type: Cable screw terminal
- Recommended Cable Section: 0.25 mm to 4 mm
- Cable Type: Stranded or Solid Wire
- Maximum Response Time: 50ms
- Expected Life - Mechanical: 3 million operations (60cpm)
- Expected Life - Electrical: 100.000 cycles (6cpm with resistive load)
Properties
Properties
| Technology | KNX |
| Mounting | DIN Rail |
| Input voltage | KNX Bus (29VDC) |
| Outputs | 16 |
| IP rating | IP20 |
| Mounting Width | 8MW |
| Operating Voltage | KNX Bus (29VDC) |
