ZENNIO
ZIO-MB20
MAXinBOX 20 KNX multifunction actuator - 20 outputs 16A
Product code:
ZIO-MB20
Multifunction actuator for DIN-rail (10 units) that offers multiple configurations of up to 10 shutter channels, up to 20 independent outputs of 16 A (capacitive loads supported) and up to 5 blocks of 2-pipes fan coil controller. It allows manual control of its outputs thanks to the push buttons on the cover. LED indicators can show the status of its outputs. It includes 30 independent logical functions to enlarge the versatility of the automations in KNX system. It is compatible with KNX Secure.
Description
- 5 different configurable blocks: shutter channels (up to 10), individual outputs (up to 20) and 2-pipe fan coil control (up to 5)
- Outputs suitable for capacitive loads, maximum 140 μF
- Manual output operation with push button and LED status indicator
- Supports KNX Data Secure
- 30 logic functions
- 2 Master light controls
- Output timing
- Total data saving on KNX bus failure
- Integrated KNX BCU (TP1-256)
- Dimensions 68 x 90 x 175 mm (10 DIN units)
- DIN rail mounting according to IEC 60715 TH35, with fixing clamp
- Possibility of connecting different phases in adjacent outputs
- Conformity with the CE, UKCA, RCM directives (marks on the right).
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 4.5mA @ 29VDC, 10mA @ 24VDC
- Operating temperature: 0 C to 55 C
- Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
- Response to Bus Voltage Failure: Data saving and relay status change according to parameterization.
- Response to bus failure recovery: Data recovering and output status change according to parameterization
- Operation indication: Programming LED indicates programming mode (red) and test mode (green). Output status LED indicators reflect current output state.
Outputs:
- Contact type: Potential free outputs through bistable relays with tungsten pre-contact.
- Disconnection type: Micro-disconnection
- Rated current by output: 16(6)A * 250V AC (4000 VA), DC 7 A * 30V DC (210W)
- Max Current per Block: 40A
- Max Power per output - Resistive Load: 4000W
- Max Power per output - Inductive Load: 1500VA
- Maximum inrush current : 800A/200_s (fluorescent lamps), 165A/20ms (resistive lamps)
- Connection type: Cable screw terminal
- Recommended Cable Section: 0.5mm2 to 4mm2
- Maximum Response Time: 10ms
- Expected Life - Mechanical: 3 million operations (60cpm)
- Expected Life - Electrical: 100.000 cycles (6cpm with resistive load)
Properties
Properties
| Technology | KNX |
| Mounting | DIN Rail |
| Outputs | 20 |
| Output Type | Switching |
| IP rating | IP20 |
| Mounting Width | 10MW |
| Operating Voltage | KNX Bus (29VDC) |
| KNX Secure | Yes |
