MAXinBOX 88. KNX multifunction actuator with KNX Secure - 8 outputs 16 A / 8 inputs A/D
Description
- 8 configurable outputs: shutter channels (up to 4), individual outputs (up to 8) and 2-pipe fan coil control (up to 2)
- Outputs suitable for capacitive loads, maximum 140 μF
- Supports KNX Data Secure
- 8 analog/digital inputs
- 2 Master Light controls
- Manual output operation with push button and LED status indicator
- 10 logic functions
- Output timing
- Total data saving on KNX bus failure
- Integrated KNX BCU (TP1-256)
- Dimensions 67 x 90 x 70 mm (4 DIN units)
- DIN rail mounting according to IEC 60715 TH35, with fixing clamp
- Possibility of connecting different phases in adjacent outputs
- Conformity with the CE, UKCA, RCM directives (marks on the right side)
Technical Details
Specification
KNX supply:
Voltage (typical): 29 VDC SELV
Voltage range: 21-31 VDC
Maximum consumption Voltage: 29 VDC (typical) 4.85mA, 140.7mW. 24 VDC1 10mW, 240mW.
Connection type: Typical TP1 bus connector for 0.8 mm Ø rigid cable
External power supply: Not required
Operation temperature: 0 .. +55 °C
Storage temperature: -20 .. +55 °C
Operation humidity: 5 .. 95%
Storage humidity: 5 .. 95%
Complementary characteristics: Class B
Protection class / Overvoltage category: II / III (4000 V)
Operation type: Continuous operation
Device action type: Type 1
Electrical stress period: Long
Degree of protection / Pollution degree: IP20 / 2 (clean environment)
Installation: Independent device to be mounted inside electrical panels with DIN rail (IEC 60715)
Minimum clearances: Not required
Response on KNX bus failure: Data saving according to parameterization
Response on KNX bus restart: Data recovery according to parameterization
Operation indicator: The programming LED indicates programming mode (red) and test mode (green). Each output LED indicates its status
Weight: 334 g
PCB CTI index: 175 V
Housing material / Ball pressure test temperature: PC FR V0 halogen free / 75 °C (housing) - 125 °C (connectors).
Properties
Properties
| Technology | KNX |
| Mounting | DIN Rail |
| Inputs | 8 |
| Input voltage | KNX Bus (29VDC) |
| Outputs | 8 |
| IP rating | IP20 |
| Mounting Width | 4MW |
| Operating Voltage | KNX Bus (29VDC) |
| KNX Secure | Yes |
