ZENNIO
ZPR46
ALLinBOX 46. Multifunction device with KNX Power Supply.
Product code:
ZPR46
The starting point for most projects incorporating control and monitoring functionalities. Multifunction device that integrates a 160 mA KNX power supply, KNX-IP Interface, 4 independent thermostats, logical module, 6 analog/digital inputs and 4 relay outputs (16 A C-Load) in only 4.5 DIN rail units. Offers multiple configuration options as individual outputs, shutter channels or fan coil controller (2 pipes).
Description
- 160 mA KNX power supply with 29 VDC auxiliary output
- 110-240 VAC 50/60 Hz power input
- KNX system voltage supply and monitorisation
- Short-circuit and overvoltage protection
- Reset button and overload status LED
- KNXnet/IP tunnelling protocol (up to 5 connections)
- Maximum APDU length of 254 bytes
- Ethernet 10/100 BaseT IP with RJ45 socket
- 1 configurable output block: shutter channels (up to 2), individual outputs (up to 4) and 2-pipe fan coil control (up to 1)
- Outputs suitable for capacitive loads, maximum 140 μF
- Manual output operation through remote control
- 6 analog/digital inputs
- Climate control for up to 4 rooms
- Output timing
- 20 logic functions
- Total data saving on KNX bus failure
- Integrated KNX BCU (TP1-256)
- Dimensions 67 x 90 x 79 mm (4.5 DIN units)
- DIN rail mounting according to IEC 60715 TH35, with fixing clamp
- Conformity with the CE, UKCA, RCM directives (marks on the right side)
Technical Details
Specification
- External power supply
- Voltage: 110-240VAC 50/60Hz
- Maximum consumption: 150mA@110VAC / 75mA@230VAC
- KNX supply
- Voltage (typical): 29VDC SELV (with KNX coil)
- Maximum rated current (IBUS): 160mA
- Connection type: Typical TP1 bus connector for 0.80mm rigid cable
- Additional output
- Voltage (typical): 29VDC SELV
- Maximum rated current (IAD): IAD + IBUS < 640mA
- Operation temperature : -5C .. +45C
- Storage temperature : -20C .. +55C
- Operation humidity : 5 .. 95%
- Storage humidity : 5 .. 95%
- Complementary characteristics : Class B
- Protection class / Overvoltage category : II / III (4000V)
- Operation type : Continuous operation
- Device action type : Type 1
- Electrical stress period : Long Degree of protection / Pollution degree : IP20 / 2 (clean environment)
- Installation : Independent device to be mounted inside electrical panels with DIN rail (EN 50022)
- Minimum clearances : Not required
- Power failure back-up time : 110ms
- Maximum current before overload notification : 300mA
- Response on KNX bus failure : Data saving according to parameterization
- Response on KNX bus restart : Data recovery according to parameterization
- Operation indicator : See section "Controls and indicators"
- Weight : 300g
- PCB CTI index : 175V
- Housing material / Ball pressure test temperature : PC FR V0 halogen free / 75oC (housing) - 125oC (connectors).
Properties
Properties
| Technology | KNX |
