IWAC OUT In Wall Access Controller, Outdoors, Anthracite without doorbell
  • Iwaco fro eneg std0
  • Iwaco der eneg std0
ZENNIO ZVIIWOA1

IWAC OUT In Wall Access Controller, Outdoors, Anthracite without doorbell

Product code: ZVIIWOA1
In-wall access controller for hotels, which can be installed outdoors thanks to its IP56 & IK07 protection degree. Compatible with NFC cards or BlueTooth® devices. It identifies users when accessing the rooms or common areas, allowing or denying entry depending on their permissions.
Price (Excluding GST)
$P.O.A

Description

IWAC Out incorporates KNX Secure for a secure door opening in the communication with an actuator, which must be compatible with KNX Secure.

Made of a high-impact resistant polycarbonate, which makes the device fit for outdoors, and its installation is very easy (only KNX bus). By means of the upper LED, allow/deny access and room status (DND/MUR) are notified: it is possible to know by the led colouring if the room is occupied as well as if the guest has selected Do Not Disturb or Make Up Room status.

  • Room access control through NFC technology access cards (MIFARE DESFire EV1 and MIFARE Classic) and Bluetooth communication
  • Supports KNX Data Security
  • 1 touch area
  • Luminosity and proximity sensor
  • Customizable color access LED indicator
  • Total data saving on power failure
  • Integrated KNX BCU (TP1-256)
  • Dimensions 85.6 x 85.6 x 16.8 mm
  • Indoor or outdoor installation
  • IP56 and IK07 degree of protection
  • Surface installation
  • •Conformity with CE, UKCA, RCM directives (marks on the back side)

Technical Details

Specification

KNX supply
Voltage (typical): 29VDC SELV
Voltage range: 21..31VDC
Maximum consumption: 29VDC (typical) 15.3mA. 443.7mW.  24VDC 17.5mA. 420mW    
Connection type: Two wire cable with exterior jacket (UL20251 - 22AWG)

External power supply: Not required  
Operation temperature: -25C .. +55C  
Storage temperature: -25C .. +55C 
Operation humidity: 5 .. 95% 
Storage humidity: 5 .. 95%
Complementary characteristics: Class B
Protection class: III
Operation type: Continuous operation
Device action type: Type 1
Electrical stress period: Long
Degree of protection: IP56, clean environment
Installation: Surface mounted with screws.
Minimum clearances: Not required
Response on KNX bus failure: Data saving according to parameterization
Response on KNX bus restart: Data recovery according to parameterization
Operation indicator: According to its parameterization, the access LED can show the room status and temporally change its color when a NFC card is detected. Additionally, it indicates programming mode (steady red).
Weight: 126g
PCB CTI index: 175V
Housing material: PC+ABS FR V0 halogen free


Properties

Properties

Technology KNX
Finish Anthracite
Buscoupler Integrated
IP rating IP56
KNX Secure Yes

Documents & Downloads

Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy