RailQUAD 8. Input module with 8 analog-digital  inputs for DIN rail
ZENNIO ZIO-RQUAD8

RailQUAD 8. Input module with 8 analog-digital inputs for DIN rail

Product code: ZIO-RQUAD8
QUAD is an analog/digital sensor that offers a large variety of functionality. It has 8 analog/digital inputs can be configured as binary inputs for sensors and potential-free push buttons, as temperature probe inputs or as motion sensor inputs. Eight room thermostats for heating/cooling control systems included. Can be used with third party NTC probes as long as the resistances are known at three temperatures points.
Price (Excluding GST)
$P.O.A

Description

  • Eight configurable inputs as: ‰
    • Binary input. 
    • Temperature probe (NTC with customisable curve).
    • Motion sensor.
  • 8 thermostats.
  • Total data saving on KNX bus failure.
  • Dimensions: 67 x 90 x 35mm (2 DIN units)
  • No external supply required different from bus.
  • Integrated KNX BCU.
  • Conformity with the CE directives. 


    Zennio Thermostats:

    Technical Details

    Specification

    General System Specifications
    • KNX Power Supply: 29VDC
    • KNX Current Consumption: 6.9mA @ 29VDC
    • Connection type: Typical bus connector TP1, 0.50 mm2 section
    • Operating temperature: 0 ¡C to 55 ¡C
    • Assembly:Independent device to be mounted inside electrical panels with DIN rail (EN 50022). 
    • KNX bus failure response: Data saving according to parameterization. 
    • KNX bus restart response: Data saving according to parameterization. 
    • Operation Indicator: Programming LED indicates programming mode (red)
    Input Specifications
    • Number of inputs: 8
    • Input per common: 2
    • Input voltage: +3.3VDC for the common
    • Input current: 1.0 mA @ 3.3VDC (each input)
    • Input impedance: Approx. 3.3kohm
    • Switch type: Dry voltage contacts between input and common
    • Connection type: Cable screw terminal and matching socket
    • NTC Probe length: 10.5m. (up to 30m.)
    • NTC accuracy (@ 25 ¡C): 0.5 ¡C
    • Temperature measure precision: 0.1 ¡C
    • Max cable length: 30m.
    • Cable section: 0.15 mm2 to 1 mm2
    • Response time: Max. 10 ms

    The probes can be from Zennio or any NTC probe with known resistances of three temperatures in the range [-55 to 150 ¡C]. 

    Properties

    Properties

    Technology KNX
    Mounting DIN Rail
    Inputs 8
    IP rating IP20
    Mounting Width 2MW
    Operating Voltage KNX Bus (29VDC)

    Documents & Downloads

    Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy