ZENNIO
ZSYIPRCL
IP Router CL. KNX-IP Router
Product code:
ZSYIPRCL
IP Router CL can be used as line coupler or area coupler with a IP based backbone or main line, through KNXnet/IP Routing protocol. It also allows programming or monitoring a device from the IP network (PC, BMS system...) by using KNXnet/IP Tunneling protocol (up to 4 connections at the same time). It does not need external power supply nor PoE.
Description
- KNXnet/IP tunneling protocol (up to 4 simultaneous connections)
- KNXnet/IP routing protocol
- Support of long messages (max. 240 byte APDU length)
- Neither auxiliary power nor PoE is needed
- Load bus diagram from last hour
- Manual function enable/disable button
- Ethernet 10/100 BaseT IP (Fast Ethernet)
- Parameterizable filtering for addresses 14/X/X and onwards
- Dimensions 90 x 71 x 36mm (2 DIN units)
- DIN rail mounting (EN 50022), through pressure
- Integrated KNX BCU
- Conformity with the CE directives (CE-mark on the backside)
Technical Details
Specification
- KNX Power Supply: 29V DC
- KNX Max current consumption: 20mA @ 29VDC
- External Power Supply: N
- External Current Consumption: 30mA @ 24VDC
- IP Connector - Ethernet connector: RJ45
- IP Connector - IP communication: Ethernet 10/100 BaseT (up to 10Mbits)
Properties
Properties
| Technology | KNX |
| Mounting | DIN Rail |
| IP rating | IP20 |
| Mounting Width | 2MW |
| Operating Voltage | KNX Bus (29VDC) |
