KNX Line Coupler CL
Description
- Long messages up to 250 bytes.
- 6 Status LED.
- Low current consumption.
- Manual function enable/disable button.
- DIN rail mounting (EN 50022), through pressure.
- Dimensions 90 x 70 x 35mm (2 DIN units).
- No external power supply required other than the Bus.
- Integrated KNX BCU.
- Conformity with the CE directives.
Technical Details
Specification
KNX Supply
Voltage (typical): 29VDC SELV
Voltage range: 21... 31VDC
Maximum consumption
Voltage
29VDC (typical): Less than 10mA, Less than 290mW
24VDC: Less than 10mA, Less than 240mW
Connection type: Typical TP1 bus connector for 0.80mm Ø rigid cable
External Power Supply: Not required
Operation temperature: from -5oC to +45oC
Storage temperature: from -20oC to +60oC
Operation humidity: from 5% to 93% RH (No condensation)
Storage humidity: from 5% to 93% RH (No condensation)
Complementary characteristics: Class B
Protection class: III
Operation type: Continuous operation
Device action type: Type 1
Electrical stress period: Long
Degree of protection: IP20, clean environment
Installation: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
Status LED
Mainline: Green (Main line OK), red (manual overwrite active), OFF (error)
Sub-line: Green (Sub-line OK), OFF (error or not connected)
Mainline Traffic: Blinking: green (bus traffic on mainline), red (error), OFF (no traffic)
Sub-line Traffic: Blinking: green (bus traffic on sub-line), red (error), OFF (no traffic)
Group Addresses (GA): OFF (different configuration on mainline and sub-line), green (filter table active), green and red (route all), red (block)
Physical Addresses (PA): OFF (different configuration on mainline and sub-line), green (filter table active), orange (route all), red (block)
Weight: 66g
PCB CTI: 175 V
Housing: Plastic PA66, grey
Properties
Properties
| Technology | KNX |
