Aeotec Nano Shutter
Description
Nano Shutter connects to your home’s existing motor-controlled accessories. It does so simply, and it immediately makes those accessories available for control, automation and scheduling via Z-Wave.
It can be wired to connect directly to the motor itself. It can be wired to any existing wall switch that controls the motor. And it can be connected in seconds to WallSwipe, allowing you to further enhance Nano Shutter to have touch and gesture control.
Once installed, you can control Nano Shutter via any connected switch, and via Z-Wave through your gateway, remote control, and smartphone app.
Technical Details
Specification
Power input: 120 to 240VAC, 50/60Hz.
24V DC
Repeater: Yes
Beaming: Yes
AES 128 Security: Yes
S2 Framework: Yes
Power Input: 120 - 240VAC and 50/60Hz
Power Output:
Motor type: Single-phase AC asynchronous motor.
Max load rating: 100-240VAC, 50/60Hz, Max:2.5A.
Wiring Terminals: N, L, IN, OUT1, OUT2, S1, S2, Touch Panel
N – Power input for neutral.
L – Power input for live..
IN – Input for load power supply.
OUT1 – Output for Motor direction 1.
OUT2 – Output for Motor direction 2.
S1 – External switch 1 control for Motor.
S2 – External switch 2 control for Motor.
Max standby power: <0.8W.
Dimensions: 42.5 x 40 x 20 mm (1.7 x 1.6 x 0.8 in)
Environment of Installation:
Must be installed indoors
Should be located in a dry location
Should be installed in a fire resistant plastic gangbox.
Should not be installed in a metal gangbox for optimisation of Z-Wave range.
Operating temperature:
0℃ to 40℃
32 ℉ to 104 ℉ .
Operating humidity: 8% to 80%.
Operating distance:
Up to 492 feet outdoors.
Up to 150 metres outdoors
Properties
Properties
| Technology | Wireless Control |
